По своей модульной конструкции стабилизирующая система Artemis Cine/HD гармонирует с кино-и
(HD-) видеокамерами. Компактная конструкция с вращаемым на 180° батарейным держателем делает возможной работу аккумуляторов в
Standard-, Low-и High-режимах.
ARE YOU GOING STEADI WITH ANYBODY? Artemis Cine/HD по многим показателям улучшенная стабилизирующая система по сравнению с уже имеющимися. Она легко конфигурируется – для кино или видео, и собирается почти без применения инструмента.
POST и GIMBAL. На обоих концах телескопической трубы (42-70см) могут монтироваться различные модули для установки камеры, монитора и аккумуляторов. Шкалы на обеих трубах облегчают простейшую юстировку. Для управления системой служит Gimbal, представляющий собой гриф, самоцентрирующийся механизм которого заметно упрощает балансировку всей системы
Artemis-Cine/HD.
SIDE-TO-SIDE-MODUL. Side-to-side-модуль между Post-ом и камерой является информационным и управляющим центром системы. Область сдвига камеры составляет во все стороны 30 мм. Встроенный нивелир на задней стороне модуля всегда в поле зрения оператора. 4 крепления (2 впереди, 2 сзади) предназначены для установки фокусирующих устройств
(Genio,Fox и ARRI).
Artemis Cine/HD - Cine - EFP Pro SDI HD - EFP
State-of-the-Art-стабилизирующая система
Features:
• Modular construction:
Quick release mechanism at the post connection/docking ring makes the artemis so modular. It is so easy to separate the post, which is contains the main cable using 12 pin Lemo plugs from the side to side module and the lower
sled.
• Separated power lines:
The internal wiring of the system offers two separated power lines, one for the camera, focus and aux power and one line for monitor and video power. This layout will help to reduce noise on the monitor and video
transmission.
• Lemo plugs and sockets:
All socket and cables are using Lemo connectors and are made specially for Sachtler by Lemo.
• Internal Tally system:
Both artemis systems offers an internal Tally system, which can be used with all
cameras.
• Low weight:
Both systems weight 3 Kg / 6.6 lbs without monitor and batteries.
• Dual-Dynamic-Balance
For a perfect dynamic balance, specially when flat panel monitors are used.
More features:
• 1.5“ Post (telescopic)
• 1.5“ Gimbal (No Tool)
• 8“ Camera dovetail plate(Paddock Pro compatible)
• 3 Batteries variations (Anton/Bauer, PAG, IDX, Sony V-Mount)
• No-Tool-Operations No tools are needed for following operations
• Clamping of the camera dovetail plate
• Adjusting of the Side-To-Side
• Adjusting of the fore and aft
• Positioning of the Gimbal
• Monitor bracket adjustments
• Dynamic-Balance adjustment
• Dual-Dynamic-Balance adjustment
All other adjustments like,
• Length adjustment of the telescopic post
• Vest adjustments
• Spring arm adjustments are performed with only one Allen wrench (4mm / 5/32“)
|